You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Watercolor, gouache, mica, and pyrography on wood.
Artwork measures 6.5”x9.5”.
Prints are selected at random; all have good image transfer.
These prints are artist proofs for my block tiger skull linocut. Artist proofs are taken to test a block, printing pressure, and ink color. They are not numbered, but they are individually signed in pencil on the back outer edge of the paper. Money from artist proofs goes right back into affording better linocut supplies and bigger linocut projects.
Medium: oil based relief printing ink on Japanese printmaking paper. This paper is naturally thinner and the sheet used has a vintage appearance.
Paper measures roughly 9”x8”; artwork measures roughly 6.5”x5”.
Prints are selected at random; all have good image transfer.
These prints are artist proofs for my Panthera atrox jawbone linocut. Artist proofs are taken to test a block, printing pressure, and ink color. They are not numbered, but they are individually signed in pencil on the back outer edge of the paper. Money from artist proofs goes right back into affording better linocut supplies and bigger linocut projects.
Medium: oil based relief printing ink on 300 series Strathmore paper.
Paper measures roughly 8.5”x7”; artwork measures roughly 4.5”x6.5”.
A tiny painting of an owl, family done in black pen, walnut ink, and a little white colored pencil.
Paper measures 2.5”x 3.75”.
A tiny painting of a deer jawbone. Media is pen and handmade walnut ink.
Paper measures 2.5”x3.75”.
A tiny painting of a dear job bone. Media is pen and handmade walnut ink.
Paper measures 2.5”x 3.75”.
Each piece of art is on Legion papers and measures 2.5”x3.75”. Media includes pen, gouache, water, and metallic mica pigments.
Sold as a pair.
A variant of my “Floor Time” artwork; sized and extended for use with smartphones. You will receive a digital PNG file that is 2876 × 2556 pixels. Just move, zoom, and crop to set your wallpaper! Use the left side for your lock screen and the right side for your home screen.
Watermarks are absent from the downloaded image.
These are handmade monoprints; each piece is hand printed individually from a carved design and then a combination of acrylic ink and watercolor washes applied. Every print is unique both in its base print and mixed media embellishment.
An open edition print means that the line art will continue to be printed for as long as the base block lasts. Each print is roughly 5”x7” on 6”x8” deckle-edge watercolor paper. Prints frame best with a floating frame style; they may also be floated on top of an acid-free mat with archival framer’s tape.
Please select the letter for the individual print you desire.
These are handmade monoprints; each piece is hand printed individually from a carved design and then a combination of acrylic ink and watercolor washes applied. Every print is unique both in its base print and mixed media embellishment.
An open edition print means that the line art will continue to be printed for as long as the base block lasts. Each print is roughly 5”x7” on 6”x8” deckle-edge watercolor paper. Prints frame best with a floating frame style; they may also be floated on top of an acid-free mat with archival framer’s tape.
Please select the letter for the individual print you desire.
These are handmade monoprints; each piece is hand printed individually from a carved design and then a combination of acrylic ink and watercolor washes applied. Every print is unique both in its base print and mixed media embellishment.
An open edition print means that the line art will continue to be printed for as long as the base block lasts. Each print is roughly 5”x7” on 6”x8” deckle-edge watercolor paper. Prints frame best with a floating frame style; they may also be floated on top of an acid-free mat with archival framer’s tape.
Please select the letter for the individual print you desire.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Watercolor, gouache, colored pencil, and pyrography on wood.
Artwork measures 6.5”x9.5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Acrylic ink and pyrography on wood.
Artwork measures 5”x7”.
You are buying a ready-to-hang original piece of art from J Thompson (Palaeosinensis). Birch wood panels are cradled and ready to hang. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Acrylic and mixed media on birch panel. Heavy glossy varnish.
Measures 8”x10” and 1 inch deep.
You are buying a ready-to-hang original piece of art from J Thompson (Palaeosinensis). Birch wood panels are cradled and ready to hang. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Acrylic, watercolor, & colored pencil mixed media on birch panel. Glossy varnish.
Measures 8”x10” and 1 inch deep.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Gouache and pyrography on wood panel.
Artwork measures 5”x7”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Watercolor and pyrography on wood.
Artwork measures 3”x5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Gouache and pyrography on wood.
Artwork measures 3”x5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Wood panels come with preattached sawtooth hangers. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Gouache, walnut ink, mica, and pyrography on wood.
Artwork measures 4” across..
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Paper art is matted and ships in a protective plastic sleeve. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Pen on paper.
Mat measures 5”x7”, artwork measures 3.5”x5.5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Paper art is matted and ships in a protective plastic sleeve. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Pen on paper.
Mat measures 5”x7”, artwork measures 3.5”x5.5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Paper art is matted and ships in a protective plastic sleeve. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Pen, watercolor, and gouache on paper.
Mat measures 5”x7”, artwork measures 3.5”x5.5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Paper art is matted and ships in a protective plastic sleeve. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Pen, watercolor, and gouache on paper.
Mat measures 5”x7”, artwork measures 3.5”x5.5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Paper art is matted and ships in a protective plastic sleeve. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Pen, watercolor, and gouache on paper.
Mat measures 5”x7”, artwork measures 3.5”x5.5”.
You are buying a ready-to-hang or ready-to-frame original piece of art from J Thompson (Palaeosinensis). Paper art is matted and ships in a protective plastic sleeve. All artwork arrives signed on the back; any front signatures are already visible in photos. Regardless of type all artwork should be handled with care, hung away from direct light, & kept out of extreme high or low humidity.
Pen, watercolor, and gouache on paper.
Mat measures 5”x7”, artwork measures 3.5”x5.5”.
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
Please note the bird of prey and barn owl mask are text instructions only as they are older patterns. The raven mask has text and visual instructions.
Want to own my 3 bird mask patterns in one convenient package? This is the listing for you! You can check the individual listings for detailed information about each mask pattern. You will be receiving a .zip file that will need to be unzipped/unpacked to access the 3 printable PDFs.
Here are some programs that can open .zip files; they are either free or have a free trial.
https://www.winzip.com/win/en/zip-file.html
https://www.7-zip.org/
https://www.peazip.org/
https://www.zipware.org/
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
Want to own my first 3 mask patterns in one convenient package? This is the listing for you! You can check the individual listings for detailed information about each mask pattern. You will be receiving a .zip file that will need to be unzipped/unpacked to access the 3 printable PDFs.
Here are some programs that can open .zip files; they are either free or have a free trial.
https://www.winzip.com/win/en/zip-file.html
https://www.7-zip.org/
https://www.peazip.org/
https://www.zipware.org/
This is a mask pattern for a low-polygon rabbit mask. You will be receiving a 47 page PDF computer file that includes includes an explanation of the pattern, a section on materials, explanations of sizing and printing, tips and tricks, a page on where to find crafting help, a map of pieces, assembly instructions with illustrations, a pattern for rounded rabbit ears, a pattern for pointy hare ears, and two different sizes of mask pattern (Youth and Adult). Access to a printer is required.
The rabbit mask is intended to fit very close to the head & glasses-wearers may require some support foam. The mask is test fitted and designed with glasses in mind.
You will at bare minimum need about 5 square feet of cardboard or 2-4mm EVA foam, elastic, hot glue or contact cement, acrylic paint, & a cutting implement to complete this mask.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
This is a mask pattern for a low-polygon raven mask. You will be receiving a 38 page PDF computer file that includes includes an explanation of the pattern, a section on materials, explanations of sizing and printing, tips and tricks, a page on where to find crafting help, a map of pieces, assembly instructions with illustrations, and two different sizes of mask pattern (Youth and Adult). Access to a printer is required.
The raven mask is intended to fit very close to the head & glasses-wearers may require some support foam.
You will at bare minimum need about 4 square feet of cardboard or 2-4mm EVA foam, elastic, hot glue or contact cement, acrylic paint, & a cutting implement to complete this mask.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
This is a mask pattern for a low-polygon horse mask. You will be receiving a 29 page PDF computer file that includes includes an explanation of the pattern, a section on materials, explanations of sizing and printing, tips and tricks, a page on where to find crafting help, a map of pieces, assembly instructions with illustrations, and two different sizes of mask pattern (Youth and Adult). Access to a printer is required.
The horse mask is intended to fit very close to the head & is tested on glasses-wearers.
You will at bare minimum need about 4 square feet of cardboard or 2-4mm EVA foam, elastic, hot glue or contact cement, acrylic paint, & a cutting implement to complete this mask.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
=====
There is now a public Telegram group for sharing your project with other Paleo Panthera mask-makers and getting help on trouble spots.
Click here for the telegram group; a new window will open.
Resources for Tools and Supplies
=====
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
This is a mask pattern for a low-polygon big cat; you will be receiving a digital download that includes a printable PDF with instructions, a map of the pieces, and all of the original pieces at-size for you to cut out. It’s the ultimate in DIY! This is a moderately difficult pattern that includes folded pieces and cut-out pieces.
These masks fit very closely to the head and face so if you’re used to a roomier costume try the pattern out in cardstock to get an idea of which size you need or if you need to enlarge the pattern further.
Simple instructions/pattern for paw gloves are now included. They require glue, cardboard, paint, and costume opera gloves.
This mask is about 7.5-8” wide across the back opening when complete; you may need to shrink the pattern pages if you’re on the small side and instructions are included.
You will at bare minimum need cardboard, elastic, hot glue or contact cement, and acrylic paint to complete this mask. Also works with EVA foam. I typically use about two 12”x24” sheets of cardboard for the whole project including any off-pattern customizing.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
=====
There is now a public Telegram group for sharing your project with other Paleo Panthera mask-makers and getting help on trouble spots.
Click here for the telegram group; a new window will open.
Resources for Tools and Supplies
=====
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
This is a mask pattern for a low-polygon canid mask; make it into whatever species your heart desires! Maybe a wolf, maybe a fox, or maybe a malamute is more your style. You will be receiving a 16 page digital download that includes includes a tips page, order of operations, map of the pieces, and two different sizes (6-7” and 7.5-8.5”) to choose from. It’s the ultimate in DIY! This is an easy-moderate difficulty pattern that includes just a few folds and a couple of overlapping pieces.
These masks fit very closely to the head and face so if you’re used to a roomier costume try the pattern out in cardstock to get an idea of which size you need or if you need to enlarge the pattern further.
Simple instructions/pattern for paw gloves are now included.
You will at bare minimum need cardboard, elastic, hot glue or contact cement, and acrylic paint to complete this mask. Also works with EVA foam. I typically use about two 12”x24” sheets of cardboard for the whole project including any off-pattern customizing.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
=====
There is now a public Telegram group for sharing your project with other Paleo Panthera mask-makers and getting help on trouble spots.
Click here for the telegram group; a new window will open.
Resources for Tools and Supplies
=====
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
This is a mask pattern for a low-polygon bird of prey(raptors such as hawks, eagles, and ospreys); you will be receiving an 18 page digital download that includes tips, an order-of-operations, a map of the pieces, and 2 different mask sizes (6-7” & 7.5-8.5”) to choose from.. It’s the ultimate in DIY! This is an easier pattern that includes folded pieces and overlapping pieces.
These masks fit very closely to the head and face so if you’re used to a roomier costume try the pattern out in cardstock to get an idea of which size you need or if you need to enlarge the pattern further.
The pattern does NOT include any kind of feather patterns; I cut mine by hand and wasn’t able to record them. If I update the pattern with this previous buyers will be entitled to a copy of any new versions.
You will at bare minimum need cardboard, elastic, hot glue or contact cement, and acrylic paint to complete this mask. Also works with EVA foam. I typically use about two 12”x24” sheets of cardboard for the whole project including any off-pattern customizing.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
=====
There is now a public Telegram group for sharing your project with other Paleo Panthera mask-makers and getting help on trouble spots.
Click here for the telegram group; a new window will open.
Resources for Tools and Supplies
=====
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
This is a mask pattern for a low-polygon barn owl mask. You will be receiving a 10 page digital download that includes includes a tips page, order of operations, map of the pieces, and two different sizes (6” and 7.5-8” wide) to choose from. It’s the ultimate in DIY! This is an easy pattern with a minimal number of pieces; it’s a great beginner mask for this reason.
These masks fit very closely to the head and face so if you’re used to a roomier costume try the pattern out in cardstock to get an idea of which size you need or if you need to enlarge the pattern further.
You will at bare minimum need cardboard, elastic, hot glue or contact cement, and acrylic paint to complete this mask. Also works with EVA foam. I typically use about one 12”x24” sheet of cardboard for the whole project including any off-pattern customizing; get two sheets if you’re worried.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
=====
There is now a public Telegram group for sharing your project with other Paleo Panthera mask-makers and getting help on trouble spots.
Click here for the telegram group; a new window will open.
Resources for Tools and Supplies
=====
This mask pattern is generously sponsored by WolfWings
=====
These masks are for personal use ONLY; you may not use them to sell either as bases or finished masks.
This is a mask pattern for a low-polygon red panda mask. You will be receiving a 13 page digital download that includes includes a tips page, order of operations, map of the pieces, instructions on simple paw gloves, and two different sizes (7.5” and 9.25” tall) to choose from. It’s the ultimate in DIY! This is an easy pattern with a minimal number of pieces; it’s a good beginner mask for this reason.
These masks fit very closely to the head and face so if you’re used to a roomier costume try the pattern out in cardstock to get an idea of which size you need or if you need to enlarge the pattern further. The red panda is also unusually wide for a mask so you may do better to measure the height of the face opening you need rather than the width.
You will at bare minimum need cardboard, elastic, hot glue or contact cement, and acrylic paint to complete this mask. Also works with EVA foam. I typically use about one 12”x24” sheet of cardboard for the whole project including any off-pattern customizing; get two sheets if you’re worried.
If you send me pictures of your creations I’ll upload them here for others to see how creative these masks can be!
Your eyes do not deceive you…this pattern is free! Print to a full letter size (8.5”x11”) page. You’ll need cardboard, costume opera gloves, glue, and paint.
Motion example (youtube video): Click me!
(Claws shown are just flat cardboard cutouts if you want claws on your paws!)
THIS IS A BETA MASK PATTERN - THERE ARE NO INSTRUCTIONS. ZERO. ZIP. NADA. NO HELP BEYOND THIS POINT. DO NOT EMAIL ME FOR HELP.
Well then what is there? The pattern itself is complete; a small/kid and adult/large with correctly labeled parts and edges. Already tested. If you follow the alphabetical order you should still do well, but this is not a project for beginners (Except maybe particularly bold ones who learn by jumping in the deep end). If you have an engineering mind you may do just fine!
When instructions are complete early adopters will be supplied with the finished instructions and the beta version will be replaced by the final version on the site.
If you want to break-neck-speed make something for Halloween despite my very trying October this is your chance!
THIS IS A BETA MASK PATTERN - THERE ARE NO INSTRUCTIONS. ZERO. ZIP. NADA. NO HELP BEYOND THIS POINT. DO NOT EMAIL ME FOR HELP.
Well then what is there? The pattern itself is complete; a small/kid and adult/large with correctly labeled parts and edges. Already tested. If you follow the alphabetical order you should still do well, but this is not a project for beginners (Except maybe particularly bold ones who learn by jumping in the deep end). If you have an engineering mind you may do just fine! NOTE: The raven skull is a relatively simple mask and I think quite doable even without detailed instructions. It’s in very few pieces compared to some of my masks and the jaw hinge is simply a bit of ribbon or fabric glued on.
When instructions are complete early adopters will be supplied with the finished instructions and the beta version will be replaced by the final version on the site.
If you want to break-neck-speed make something for Halloween despite my very trying October this is your chance!
A cave lion skull pendant (Panthera spelaea) cast in solid Britannia pewter. Skull measures slightly less than 1 inch wide, 1 1 1/4 inch long, and 1/2 thick. The attached bail can accommodate 3-4mm chains or cords.
A raven skull pendant cast in solid Britannia pewter. Skull measures slightly less than 1 1/4 inch long, 3/4 inch wide, and a little taller than 1/2 inch thick. The bail can accommodate 3-4mm chains or cords.
A black vulture skull pendant cast in solid Britannia pewter. Skull measures roughly 1 1/4 inch long, 3/4 inch wide, and 1/2 thick. The bail can accommodate 3-4mm chains or cords.
A dire wolf skull pendant (Aenocyon dirus) cast in solid Britannia pewter. Skull measures roughly 1 1/4 inch long, 3/4 inch wide, and 1/2 thick. The attached bail can accommodate 3-4mm chains or cords.
This is a two-post Britannia pewter pin of a Smilodon skull. It’s about 1.5” long and features a satin finish to bring out the bone texture and comes with two butterfly clasps. All my pins are also compatible with locking backs.
You can pick up locking backs here.
This is a two-post Britannia pewter pin of a cave lion (P. spelaea) skull. It’s about 1.5” long and features a satin finish to bring out the bone texture and comes with two butterfly clasps. All my pins are also compatible with locking backs.
This is a two-post Britannia pewter pin of a dire wolf (C. dirus) skull. It’s about 1.5” long and features a satin finish to bring out the bone texture and comes with two butterfly clasps. All my pins are also compatible with locking backs.
This is a two-post Britannia pewter pin of a cave bear (U. spelaeus) skull. It’s about 1.5” long and features a satin finish to bring out the bone texture and comes with two butterfly clasps. All my pins are also compatible with locking backs.
This is a two-post Britannia pewter pin of an articulated Velociraptor foot. It’s about 1.5” long and features a satin finish to bring out the bone texture and comes with two butterfly clasps. All my pins are also compatible with locking backs.
These Britannia pewter pins were molded from a real coyote molar tooth or carnassial taken from the rearmost part of the lower jaw. Excluding the pin post the tooth measures about 1 inch wide, a little less than 1/2 inch thick, and about 1 inch tall. Double twin posts are stainless steel with a nickle butterfly clasp back. They're great conversation pieces for hats or bags in particular!
Pins come packaged in a black cotton filled gift box.
These Britannia pewter pins were molded from a real coyote molar tooth or carnassial. Excluding the pin post the tooth measures about 3/4 inch long, 1/2 inch wide, and about 1/4 inch tall. Pin posts are stainless steel with a nickle butterfly clasp back. Pins are randomly assorted molars that may be right or left facing. They're great conversation pieces for hats or bags in particular!
Pins come packaged in a black cotton filled gift box.
Solid Britannia pewter coyote pendant. The design measures approximately 1.25 inches high, 1 inch wide, & 1.25 inch nose to back. Eyes are genuine peridot cabochons. Pendant has a hidden bail that can accommodate up to 3mm chains/cords.
Solid Britannia pewter coyote pendant. The design measures approximately 1.25 inches high, 1 inch wide, & 1 inch nose to back. Pendant has a hidden bail that can accommodate up to 3mm chains/cords.
Britannia pewter husky pendant. The design measures approximately 1.5 inches high, 1 inch wide, & 1.5 inch nose to back. Eyes are precious blue opal cabochons. Pendant has a hidden bail that can accommodate up to 3mm chains/cords.
Britannia pewter husky pendant. The design measures approximately 1.5 inches high, 1 inch wide, & 1.5 inch nose to back. Eyes are tiger’s eye cabochons. Pendant has a hidden bail that can accommodate up to 3mm chains/cords.
Britannia pewter husky pendant. The design measures approximately 1.5 inches high, 1 inch wide, & 1.5 inch nose to back. Eyes are frosted green-gold glass cabochons. Pendant has a hidden bail that can accommodate up to 3mm chains/cords.
Solid Britannia pewter. Seated lion-woman design is inspired by the Löwenmensch paleolithic figurine. Place her in a shrine, on an altar, or anywhere you need a small guardian. Figure is approximately 1.5 inches tall.
Solid Britannia pewter rabbit pendant. The rabbit design stands about 1.5 inches high and has a bail hidden just behind the ears that can accommodate up to 4mm chains/cords. The initial available stock is 5.
These little coelacanths are are about 1 1/2 inch long, 1 inch high, and a little over 1/4 thick. They stand upright on their own fins and are fully detailed on both sides. Made from solid Britannia pewter.
Solid Britannia pewter owl pendant. The owl design stands a little over 1 inch high and has a hidden bail that can accommodate up to 4mm chains/cords. Eyes are set with black opals that flash with a red fire in the sun.
Solid Britannia pewter owl pendant. The owl design stands a little over 1 inch high and has a hidden bail that can accommodate up to 4mm chains/cords. Eyes are set with green onyx stones.
Solid Britannia pewter owl pendant. The owl design stands a little over 1 inch high and has a hidden bail that can accommodate up to 4mm chains/cords. Eyes are set with purple glass.
Solid Britannia pewter owl pendant. The owl design stands a little over 1 inch high and has a hidden bail that can accommodate up to 4mm chains/cords. Eyes are set with vintage blue crystal that has a minor color change effect to red/gold on angle.
Solid Britannia pewter owl pendant with a custom painted design. The owl design stands a little over 1 inch high and has a hidden bail that can accommodate up to 4mm chains/cords. Eyes are set with Ethiopian white opals.
Solid britannia pendant; sleeping fox design measures about 1 inch round excluding the bail. Bail is slightly over 1/4 inch tall.
Solid Britannia pewter. Art deco inspired standing rabbit figurine. Place it in a shrine, on an altar, or anywhere you need a small guardian. Figure is approximately 1.5 inches tall including ears and stands on its own.
The britannia pewter lioness shrine figure is my largest design yet! Her proud figure is nearly 2 inches tall, .75 inches across, and is weighty solid metal.
Solid Britannia pewter. Art deco inspired standing rabbit figurine. Place it in a shrine, on an altar, or anywhere you need a small guardian. Figure is approximately 2.25 inches tall and stands on its own.
Solid Britannia pewter pendant; design features a rather toothy tiger inspired by Balinese statuary and has an attached cast bail that will accommodate 3mm chains/cords. Piece is a little under 2 inches long including the substantial bail; the design itself is roughly 1.5 inches tall.
Solid Britannia pewter pendant. The skeletal cat paw design stands nearly 2 inches high and has an attached cast bail that will accommodate 3mm chains/cords.
An Allosaurus skull carved and burned in relief on 8.75” x 11.5” wood. Additional media used includes watercolor, gouache, mica powder, and colored pencil. Artwork comes ready to hang with a pair of sawtooth hangers already attached.